Data Logger

เครื่องวัดและบันทึกอุณหภูมิ 8 ช่องสัญญาณ DaqPro 8-channel Data Logger รุ่น Daqpro

รายละเอียด

เครื่องวัดและบันทึกอุณหภูมิ 8 ช่องสัญญาณ DaqPro 8-channel Data Logger รุ่น Daqpro ยี่ห้อ Fourtec

คุณสมบัติของ เครื่องวัดและบันทึกอุณหภูมิ 8 ช่องสัญญาณ

  • เครื่องวัดและบันทึกค่าอุณหภูมิ รุ่น DaqPRO เป็นเครื่องเก็บข้อมูลที่มีประสิทธิภาพสูง สามารถทำงานด้วยตัวเครื่องเองได้ (stand-alone) โดยใช้งานร่วมกับเซ็นเซอร์ที่ได้รับมาตรฐานอุตสาหกรรมต่างๆได้
  • เครื่องบันทึกข้อมูลแสดงผลแบบกราฟ สามารถใช้มือถือในการวัดค่าง่ายต่อการใช้งาน
  • เครื่องบันทึกข้อมูล การวัดค่าต่างๆเช่น แรงดันไฟฟ้า กระแสไฟฟ้า อุณหภูมิ ชีพจรและความถี่ ตลอดจนเซ็นเซอร์ที่ผู้ใช้กำหนดเอง
  • เครื่อง Daqpro ออกแบบมาเพื่อใช้งานโดยไม่จำเป็นต้องต่อเชื่อมกับเครื่องคอมพิวเตอร์ ใช้งานโดยซอฟต์แวร์ DaqLab เพื่อการวิเคราะห์ข้อมูลเพิ่มขึ้น และการกำหนดค่าอื่น ๆ

  • เครื่องมี input จำนวน 8 ช่องสำหรับเชื่อมต่อเซ็นเซอ์ รองรับความละเอียด 16 บิต
  • เครื่องมีช่องสำหรับส่งสัญญาณ output จำนวน 1 ช่อง (One alarm output)
  • จอแสดงผลขนาดใหญ่สำหรับการติดตั้ง stand-alone การแสดงและวิเคราะห์ข้อมูล
  • ผู้ใช้งานสามารถกำหนดอัตราการบันทึกข้อมูล (sampling rate) 4,000 ตัวอย่าง / วินาที
  • แต่ละ input ผู้ใช้งานสามารถกำหนดค่าเพื่อวัดเซ็นเซอร์ที่แตกต่างกัน
  • เครื่องบันทึกข้อมูลได้สูงสุด 512 กิโลไบต์ รวมถึงโหมดการใช้งาน cyclic
  • แบตเตอรี่แบบชาร์จไฟ 7.2 V รองรับได้ถึง 24 ชั่วโมงระหว่างรอบการชาร์จ

ช่องต่อเซ็นเซอร์ 8 ช่องสัญญาณ ช่องต่อ output 1 ช่องสัญญาณ

 

  • แสดงค่า แบบกราฟ ตาราง

 

รายละเอียด

เครื่องวัดและบันทึกอุณหภูมิ 8 ช่องสัญญาณ DaqPro 8-channel Data Logger รุ่น DB5301A

INPUT TYPES
Each DaqPRO input can be configured to measure any of the input types below:
0 to 24 mA Range: 0 to 24 mA
Resolution: 4.76 μA
Accuracy: ±0.5 %
Loop impedance: 21 Ω
0 to 50 mV Range: 0 to 50 mV
Resolution: 3 μV
Accuracy: ±0.5 %
0 to 10 V Range: 0 to 10 V
Resolution: 200 μV
Accuracy: ±0.5 %
Input impedance: 125 KΩ
Temperature NTC NTC: 10/100 KΩ resistor
Range: -25 to 150 °C
Resolution: 0.05 °C
Accuracy: ±0.5 %
Temperature PT-100 Range: -200 to 400 °C
Resolution: 0.1 °C (7 mΩ)
Accuracy:
-200 to -50 ºC: ±0.5 %
50 to 400 ºC: ±0.5 %
-50 to 50 ºC: ±0.5 ºC
The DaqPRO offers up to 8 PT-100 2 wire channels or 4 PT-100 3 wire channels
Temperature Thermocouple J Range: -200 to 1200 °C
Resolution: 0.1 °C (1 μV)
Accuracy: -200 to -50 °C: ±0.5 %
50 to 1,200 °C: ±0.5 %
-50 to 50 °C: ±0.5 °C
Cold junction compensation error: ±0.3 °C
Temperature Thermocouple K Range: -250 to 1,200 °C
Resolution: 0.1°C (1 μV)
Accuracy: -250 to -50 °C: ±0.5 %
50 to 1,200 °C: ±0.5 %
-50 to 50 °C: ±0.5 °C
Cold junction compensation error: ±0.3 °C
Temperature Thermocouple T Range: -200 to 400 °C
Resolution: 0.1 °C (1 μV)
Accuracy: -200 to -50 °C: ±0.5 %
50 to 400 °C: ±0.5 %
-50 to 50 °C: ±0.5 °C
Cold junction compensation error: ±0.3 °C
Internal Temperature Range: -25 to 70 °C
Resolution: 0.1°C (1 μV)
Accuracy: ±0.5 °C
Pulse Counter (Input 1 only) Optocoupler input
Range: 0 to 65,000
Input signal: 0 to 5 V
Input impedance: 470 Ω
Bandwidth: 0 to 25 Hz
Frequency Meter (Input 1 only) Optocoupler input
Range: 20 to 4,000 Hz
Input signal: 0 to 5 V
Input impedance: 470 Ω
General A to D Specifications Noise: 30 μV rms
Internal linearity error: ±0.08 % of FSR
Offset error: 0.1 %
Open Collector Output (Output 8) Maximum current sink: 50 mA (fuse protected)
Maximum input voltage: 5 V
Input impedance: 50 Ω
Communication USB 1.1 compliant
Sampling Capacity: 512 KB
Analog sampling rate: Variable, 1 sample/hour to 4,000 samples/sec (on 1 channel only)
Analog sampling resolution: 16-bit
Channel separation: 80 dB
Man Machine Interface Full keyboard operation – enables manual programming of the logger
Graphic LCD 64 x 128 pixels
Power Supply Internal rechargeable 7.2V NiMH battery
Built-in battery charger
External 9 to 12 V DC input
Battery life: 25 hours between charges
Operating Temperature Range 0 to 50 °C
Casing Plastic PC-ABS
Dimensions: 182 x 100 x 28 mm
Weight: 450 g
Standards Compliance CE, FCC

 

สินค้าที่ใกล้เคียง