Atomic Absorption

เครื่องวิเคราะห์ธาตุโลหะหนัก Atomic Absorption Spectrophotometer รุ่น WFX-110B, 120B, 130B

รายละเอียด

เครื่องวิเคราะห์ธาตุโลหะหนัก Flame Atomic Absorption Spectrophotometer รุ่น WFX-110A / 120A / 130A ยี่ห้อ RAYLEIGH

เครื่องอะตอมมิกแอปซอบชั่น สเปคโตรโฟโตมิเตอร์ เป็นเครื่องมือที่ใช้สำหรับการวิเคราะห์หาปริมาณธาตุในสารตัวอย่างที่ผ่านการเตรียมเป็นสารละลายแล้ว AAS เป็นเครื่องสำหรับวิเคราะห์ธาตุโลหะหนักในระดับปริมาณต่ำ รุ่น WFX-110B และ WFX-120B

AAS เป็นเครื่องสำหรับวิเคราะห์ธาตุโลหะหนัก ใช้เทคนิคการวิเคราะห์เปลวไฟจาก ออกซิเจน อะเซทิลีน ไนตรัสออกไซด์ – อะเซทิลีน สำหรับการวิเคราะห์องค์ประกอบอุณหภูมิสูง เช่น Ca, Al, Ba, W, Mo, Ti, V และอื่น ๆ อุณหภูมิเปลวไฟเป็นอย่างต่อเนื่อง ปรับได้ระหว่าง 2300-2950C ซึ่งทำให้สามารถเลือกอุณหภูมิ เหมาะกับละอองที่ดีที่สุด สำหรับองค์ประกอบที่แตกต่างกัน มีคุณสมบัติที่แตกต่างกัน AAS มีค่าใช้จ่ายในการวิเคราะห์ต่ำ

ระบบทำให้เป็นละอองด้วยเปลวไฟพร้อมตัวเผาเปลวไฟ

  • หัวเตาเปลวไฟสามารถติดตั้งเพื่อทำการวิเคราะห์การปล่อยเปลวไฟสำหรับโลหะอัลคาไล เช่น K, Na ฯลฯ (WFX-110B / 120B)

ระบบควบคุมอัตโนมัติที่แม่นยำอย่างเต็มที่

  • แหล่งกำเนิดแสง หลายหลอดอัตโนมัติ ปรับกระแสไฟและปรับตำแหน่งลำแสงอัตโนมัติ
  • การสแกนความยาวคลื่นอัตโนมัติและการเลือกสูงสุด
  • เปลี่ยนแบนด์วิดท์ sperctral อัตโนมัติ
  • ระบบจุดระเบิดอัตโนมัติ

มาตรการป้องกันความปลอดภัยที่สมบูรณ์แบบ

  • การเตือนภัยและการป้องกันโดยอัตโนมัติสำหรับการรั่วไหลของก๊าซเชื้อเพลิง, การไหลผิดปกติ, ความดันอากาศไม่เพียงพอและการดับไฟที่ผิดปกติในระบบเปลวไฟ

ซอฟต์แวร์วิเคราะห์ที่ใช้งานง่ายและเป็นประโยชน์

  • ซอฟต์แวร์การวิเคราะห์ AAS ที่ใช้งานง่ายนั้นถูกสร้างขึ้นภายใต้ระบบปฏิบัติการ Windows ทำให้ทราบถึงการตั้งค่าพารามิเตอร์ที่รวดเร็วและการปรับให้เหมาะสม
  • การแสดงผลข้อมูลที่วัดได้อัตโนมัติการคำนวณอัตโนมัติและผลการวิเคราะห์อัตโนมัติพิมพ์ออกมา

รายละเอียด

เครื่องวิเคราะห์ธาตุโลหะหนัก Atomic Absorption Spectrophotometer รุ่น WFX-110B, 120B, 130B

Main Specification Wavelength range 190-900n
Wavelength accuracy ±0.25nm
Resolution Two spectral lines of Mn at 279.5nm and 279.8nm can be separated with the spectral bandwidth of 0.2nm and valley-peak energy ratio less than 30%.
Baseline stability ≤0.004A/30min
Background correction The D2 lamp background correction capability at 1A is better than 30 times.
The S-H background correction capability at 1.8A is better than 30 times. (only for WFX-110B/120B)
Light Source Lamp turret 6-lamp turret (WFX-110B/120B),
4-lamp turret (WFX-130B)
auto alignment, fully automated scan and peak-picking.
Lamp current adjustment Automatic adjustment and display.
Wide pulse current : 0~25mA,
Narrow pulse current : 0~10mA
Lamp power supply mode 400Hz square wave pulse
100Hz Narrow square wave pulse + 100Hz wide square wave pulse (WFX-110B/120B)
Optical System Monochomator Single beam,Czerny-Turner design grating monochromator
Grating 1800 l/mm
Focal length 277mm
Blazed wavelength 250nm
Spectral bandwidth 0.1nm, 0.2nm, 0.4nm, 1.2nm, automatic change.
Flame Atomizer Burner 10cm single slot all-titanium burner
Spray chamber Corrosion resistant all-plastic spray chamber.
Nebulizer High efficiency glass nebulizer with metal sleeve, sucking up rate: 6-7 mL/min
Emission bumer Provided with WFX-110A/120A
Detaction and Data Processing System Detector R928 Photomultiplier with high and wide spectral range.
Software Windows operating system
Analytical method Working curve auto-fitting; standard addition method; automatic sensitivity correction; automatic calculation of concentration and content.
Repeat times Maximum 20 times of repeat measurement, automatic calculation of mean value, standard deviation and relative standard deviation .
Multi-task function Sequential measurement of multi-elements in one sample
Condition reading With model function
Result printing Measurement data and final analytical report printout, editing with Excel.
Standard RS-232 serial port communication
Characteristic Concentration and Detection Limit Normal Air-C₂H₂ flame Cu : Characteristic concentration ≤0.025mg/L, Detection limit≤0.006mg/L
Rich oxygen Air-C₂H₂ flame Ba : Characteristic concentration ≤0.22mg/L
Al : Characteristic concentration ≤0.4mg/L (for WFX-110A)
Function Expansion Hydride vapor generator can be connected for hydride analysis.
Dimensions and weight 1020(L) x 490(W) x 540(H) mm (main unit), unpacked 80 kg

 

สินค้าที่ใกล้เคียง